Current Position：Home > PRODUCTS
Product Center
Proautox S Series Triple Screw Pump is a type of positive displacement rotatory pump for handling clear, lubricating liquid without solid content. The internal structure of the triple screw pump includes a male drive spindle, two female secondary spindles and the case that holds the three screws. The sealed chamber moving at a uniform speed is formed between the case and the three rotating screws along the axial direction. During the male drive screw rotation, liquid moves in the sealed chamber along the axial direction continuously and smoothly from suction to discharge.
Proautox Twin-Screw Pumps are self-priming, double ended positive displacement pumps with external timing gears and bearings. Manufactured in over 80 sizes, their design provides complete axial balancing of the rotating elements and eliminates all metal-to-metal contact within the pump.
The L2 series of pumps are cost-effective, robust, efficient, and available from stock. There is a wide range of sizes to meet the demands of most applications in asphalt pumping.
The Proautox Balanced Pressure Pump is a tapered barrel pump which balances the pressure below and above the plunger near the top of the upstroke of the sucker rod pump. The design feature eliminates the need for the plunger to compress the fluid-gas mixture during the downstroke which yields several benefits. It is available in an RH pump configuration in several materials and coatings.
Proautox-Gas relief HPT pump is designed to have an even flow through the entire pump with properly designed exit flow area. It handles the gas that breaks inside the pump efficiently and keeps the pump from gas locking. It performs well in hori-zontal well bores where free gas interferes with the pump from lifting fluid. Simple in construction and a low cost alternative to deal with gassy envi-ronment.
For extreme gas handling demands, the QALS Gas Compressor Pump is effective in overcoming gas locking in deep wells. It’s robust construction and 2-stage compression design efficiently moves gas through the pump: this is particularly important when pumping beneath a packer. The use of a mercury style plunger, with its increased wall thickness and spray-metal coating, greatly increases rigidity and wear resistance over other 2-stage designs. Maximum gas handling performance is available at extreme depths, up to 13,000 ft. Upgraded materials can also be selected to combat damage due to corrosive well bore conditions.
Proautox electroplating workshop of the rod pumps enjoys countrywide advanced chrome plating equipment for well type deep hole pump barrel, which can process pump barrels ranging from 1 1/4 in (31.75 mm) to 5 3/4 in (146.05 mm) and with a length up to 34 ft (10363 mm).
Stainless steel electric surface pumps with magnetic drive peripheral impeller, ideal for increasing or maintaining circulating pressures in closed circuit systems.
123 »
